Skip to content

Free slots reset daily at 00:00 & 12:00 (GMT+0)

Troubleshooting

How to read the server status page and server cards

What Online, Full, Maintenance, Offline and Unavailable mean on our status page and server cards, how ping and slots are counted, and what to do in each case.

11 min read · Published 17 Nov 202611 min readPublished 17 November 2026
Rows of rack-mounted network equipment with glowing green status lights, softly out of focus
Photo: Brett Sayles on Pexels

By LitronSSHPublished 17 November 2026How we write and check our guides

Every public server we run is listed on the server status page, and the same data appears on the server cards you see after picking a protocol and a country. Each row and each card answers three questions: does the server answer our checks, can it take a new account, and how quickly did it reply.

This guide reads those pages line by line: the five states, what the ping figure measures, how slots and resets are counted and what the New sticker means. For each state it says what to do, and when a problem report helps. If you are picking your first server, How to choose a server location is a gentler start.

The five states at a glance

A state belongs to one service on one server, so the same machine can show Online for one protocol and Unavailable for another. When several apply at once, Maintenance wins over Offline, Offline over Unavailable, and Unavailable over Full.

StateWhat it meansWhat to do
OnlineThe server answers our health checks and has at least one free slot for this service.Create an account from its row or card.
FullThe server answers, but no slot is left for this service right now. Accounts that already exist keep working.Pick another server, or wait for a slot. A countdown shows the next reset where one applies.
MaintenanceOur team has put the server into maintenance. New accounts are paused, and connections can fail until the work ends.Use another server and check back later.
OfflineA set number of health checks in a row have failed, the server reports itself offline, or it has not passed a check yet.Use another server. It comes back by itself as soon as a check finds it working again.
UnavailableThe server answers, but its own health report says the service for this protocol is stopped.Pick another server, or another service on the same machine if that one shows Online.

Servers that are Full, in Maintenance or Unavailable stay on the country pages, with the reason on their card. Offline servers are left out there but stay on the status page, and their own server page still opens and says what is wrong.

How the status page is laid out

The page gives each service its own section with a table of its servers. Above the sections you find:

  • Summary tiles: how many services and servers are listed, how many servers are online and offline, and how many service rows are in maintenance or full. A machine that carries several services appears in several sections; the Servers tile counts it once.
  • The refresh bar: a countdown to the next update, which comes every 30 seconds, and a Refresh now button. Updates pause while the tab is in the background and catch up when you come back. If an update fails, the bar says so and the last data stays on screen.
  • The reset line: the daily times when slots reset, with the time zone and a countdown to the next reset. The bar at the top of every page shows the same times.
  • Filters: service buttons, a country list and a status list. The search box matches server names, cities, countries, service names and, when shown, host names; type two words, such as a city and a service, to find rows that match both. Choosing a service also changes the page address, so you can bookmark that view.

Each section header shows how many servers the service has and how many of them answer, counting both Online and Full. Its coloured dot is green when at least one server can take a new account, amber when the servers that answer are all full, and red when none of them is Online or Full.

On a phone, a long section starts with its first few servers and a Show all button; as soon as you use a filter, every match is listed. The Host column shows each server's host name when this site is set to show host names, and the city or country otherwise.

Ping and Last checked: what they measure

The ping figure is called Response on the status page and Response time on a server page; country cards show the lowest of their servers as Best ping. It comes from our own monitoring. On a schedule set by our team, the monitoring sends each server a status request, and the figure is the time from sending it to receiving the complete answer, in milliseconds. That includes the trip both ways and the moment the server needs to prepare its reply, so a busy server can show a higher figure than its distance alone would explain. It is measured from our side, not from your device.

  • Colours: green below 150 ms, amber from 150 to 399 ms, red from 400 ms.
  • A dash (—) means there is no current figure: a set number of checks in a row have failed, or the server has not passed a check yet.
  • Last checked says how long ago the latest check ran, such as 45 s ago or 2 min ago. Not yet means the server has not been checked since it was added.

A server keeps its last state and ping until a set number of checks in a row have failed. That way one lost answer need not mark a working server down. The other side of it is that a fresh outage can take a few checks to appear, even while Last checked keeps moving.

Server and country pages show the figures from the moment you opened them; only their countdowns and times such as 2 min ago keep moving. The status page fetches new data by itself, so it is the place to watch a server you are waiting for. Reload a server page to see its latest state.

Slots left, resets and why Full can last

The slot figure is how many new accounts a server can still accept for one service. It is the smallest of three limits, and each one refills in its own way:

LimitWhat it countsWhen room comes back
Server limitCurrent accounts on the whole server, across all its services.When an account on that server ends or is removed.
Service limitCurrent accounts for this service on that server. Not every service has one.When one of those accounts ends or is removed.
Period allowanceAccounts created for this service since the last reset. Not every service has one.At the next reset time. An account that ends doesn't give its place back.
  • Where a period allowance applies, a Resets in countdown appears: in the Accounts box of a server card, on the server page and, once no slot is left, under the row on the status page. A full server's card adds New slots in with the same countdown.
  • The bar under the number turns amber when a fifth or less of the slots are left, and red at zero.
  • On a protocol page, each country card adds up the slots of the servers there that can take an account right now. No slots left means none of them can.

This is why a server can still read Full just after a reset. The reset refills the period allowance, but if the server or the service is already at its account limit, a slot opens only when one of those accounts ends. If the last slot goes while you are filling in the form, the message tells you which limit was hit: Server is full means an account limit was reached, and No slots left for now means the period's slots are taken, with the time new ones open.

A worked example: three rows read line by line

The rows below are made up for this guide. The names and numbers on the real page will be different, but you read them the same way.

  • Example 01 · Online · 48 ms in green · checked 20 s ago · 14 slots. It answers quickly, was checked moments ago and has room. If it is near you, create the account here.
  • Example 02 · Full · 95 ms · checked 1 min ago · 0 slots · Resets in 2h 10m. It works but takes no new accounts until a slot opens. Accounts already on it are not affected. Choose another server now, or come back after the countdown, knowing that the reset alone may not be enough if an account limit is the one reached.
  • Example 03 · Offline · — · checked 30 s ago · 9 slots. Our checks fail, so ignore the slot figure: it only matters once the server is back. An account you hold there may not connect for now, and the row comes back by itself after a successful check.

Server cards, country cards and the New sticker

A country page shows one card per server. Besides the state, the ping and the time of the last check, a card lists:

  • Host: the server's host name with a copy button when this site shows host names, otherwise the city or country.
  • Ports and transport: the ports the service uses on that server. SSH cards leave out the plain SSH port, as the SSH account result does. When no ports are listed, the card says they are shown with your account.
  • Validity: the durations you can choose right now.
  • Accounts: the slots left, with the reset countdown where one applies.
  • The button: Create account when the server can take one. Otherwise a greyed-out button names the state, with the reason underneath, such as All slots are taken for now or This service is paused on the server.
  • Also here: links to the other services on the same machine, a quick way to check whether one of them is Online.

On a protocol page, each country card shows the best state among that country's servers, the lowest ping among them and the slots you can use now. A country with a single server opens that server directly.

The red New sticker marks a server published in the last two days; our team can also show a server as new again, or end the label early. It sits beside the server's name on server cards and on the flag of a country card, but not on the status page. New says nothing about speed or reliability, so read the state, ping and slots as you would for any other server.

What to do in each state, and when to report

  1. Online, but your account won't connect: check that the account is still valid on My accounts, try another port listed in your details, and work through Fix connection problems.
  2. Still failing on an Online server with a recent check: this is worth a report. Open the server's page and use Report a problem with this server at the bottom of its details card, so the form already names the server and the service.
  3. Offline or Maintenance: no report is needed, because our team already knows, as the report page itself notes. Use another server in the meantime.
  4. Full: not a fault. Choose another server, or wait for a slot.
  5. Unavailable: the server itself tells our monitoring that the service is stopped. Use another server, or another service on the same machine, and tell us in a report if it stays that way for a long time.
  6. The page itself looks wrong for a long time, for example Last checked stops updating: report that too, with the time you noticed it and what the page showed.

A precise report is quicker to act on, and How to write a useful problem report shows what to put in it. Whichever server you use, connect only over networks you are allowed to use, and follow our acceptable use policy.

Pick a service

See every protocol LitronSSH offers right now and the servers that have free slots.

Questions

Why does a server show Online when my app can't connect?
Online means the server answers our health checks and has a free slot. It can't tell whether your account, your port or the network you are on works. Check the account on My accounts, then follow Fix connection problems.
Why does a Full server stay full after the reset?
The reset only refills the allowance of new accounts for the period. If the server or the service is already at its account limit, a slot opens only when one of those accounts ends or is removed.
Does Full or Unavailable affect an account I already have?
Full does not: it only stops new accounts. Unavailable means that service is stopped on the server, so accounts for it may not connect until it runs again. Maintenance can interrupt connections too.